Equipment

The right equipment matters, but how it’s used matters more: stable setups, repeatable processes, and measurement discipline. Below is a high-level snapshot of what supports our work.

Press & Stamping Support

Built for repeat production.

Stamping presses

Production presses supporting a range of parts and volumes.

Run plans matched to tooling and material
Documented setups and verification
In-process inspection

Feeding & handling

Material handling to keep output consistent and protect surfaces.

Controlled handling for critical surfaces
Setup discipline and alignment checks
Packaging aligned to receiving needs

Tooling support

In-house tool room keeps uptime high and variation low.

Preventative maintenance
Repairs and modifications
Continuous improvement

Press Inventory Overview

Available press capacity across coil-fed and blank-fed equipment.

Standard + Metric

Manufacturer	Metric Tons	US Tons	Drive Type	Frame	Feed	Bed Size (Metric)	Bed Size (Standard)	Shut Height (mm)	Shut Height (in)	Feed Height (mm)	Feed Height (in)
Verson	725.748	800	Mechanical	SS	Coil	1828.8 x 1066.8 mm	72 x 42 in	1104.9	43.5	330.2	13
Brown Boggs	544.311	600	Mechanical	SS	Coil	3048 x 1524 mm	120 x 60 in	1066.8	42	355.6	14
Niagara	453.592	500	Mechanical	SS	Coil	2743.2 x 1219.2 mm	108 x 48 in	1016	40	330.2	13
Bliss	272.156	300	Mechanical	SS	Coil	2743.2 x 1524 mm	108 x 60 in	1016	40	358.902	14.13
Verson	272.156	300	Mechanical	SS	Coil	2438.4 x 1524 mm	96 x 60 in	736.6	29	355.6	14
Warco	272.156	300	Mechanical	SS	Coil	1524 x 914.4 mm	60 x 36 in	584.2	23	254	10
Warco	272.156	300	Mechanical	SS	Coil	1524 x 914.4 mm	60 x 36 in	609.6	24	254	10
Niagara	136.078	150	Mechanical	SS	Coil	1828.8 x 1219.2 mm	72 x 48 in	472.44	18.6	254	10
USI Clearing	99.79	110	Mechanical	GAP	Blank	1066.8 x 762 mm	42 x 30 in	533.4	21	254	10
Danly	136.078	150	Mechanical	GAP	Blank	1270 x 762 mm	50 x 30 in	660.4	26	N/A	N/A
Danly	136.078	150	Mechanical	GAP	Blank	1270 x 762 mm	50 x 30 in	660.4	26	N/A	N/A
Minster	40.823	45	Mechanical	GAP	Blank	711.2 x 457.2 mm	28 x 18 in	336.55	13.25	N/A	N/A
Minster	29.03	32	Mechanical	GAP	Blank	609.6 x 304.8 mm	24 x 12 in	205.105	8.075	N/A	N/A
Niagara	68.039	75	Mechanical	GAP	Blank	914.4 x 609.6 mm	36 x 24 in	406.4	16	N/A	N/A
Denison	18.144	20	Hydraulic Press	HYD GAP	Blank	660.4 x 355.6 mm	26 x 14 in	533.4	21	N/A	N/A
Minster	40.823	45	Mechanical	GAP	Blank	711.2 x 457.2 mm	28 x 18 in	193.675	7.625	N/A	N/A
Minster	54.431	60	Mechanical	GAP	Blank	812.8 x 533.4 mm	32 x 21 in	271.78	10.7	N/A	N/A
Niagara	68.039	75	Mechanical	GAP	Blank	914.4 x 609.6 mm	36 x 24 in	406.4	16	N/A	N/A
Niagara	90.719	100	Mechanical	SS	Blank	1219.2 x 914.4 mm	48 x 36 in	571.5	22.5	N/A	N/A
Baldwin	136.078	150	Hydraulic Press	HYD SS	Blank	1219.2 x 1066.8 mm	48 x 42 in	914.4	36	N/A	N/A
Minster	54.431	60	Mechanical	GAP	Blank	812.8 x 533.4 mm	32 x 21 in	304.8	12	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	272.156	300	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	145.15	160	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	145.15	160	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A
Stamtec	145.15	160	Mechanical	GAP	Blank	1749.806 x 899.922 mm	68.89 x 35.43 in	549.91	21.65	N/A	N/A

Press list shown in both metric and standard units for quick quoting, tooling review, and production fit checks.

Machining

Precision and repeatability.

CNC machining

Machining support for parts, fixtures, and tooling details.

First-piece verification
Documented setups
Critical dimension checks

Workholding & fixtures

Fixturing designed to hold datums and repeat output.

Datum-driven fixture design
Repeatable clamping and loading
Shop-floor friendly checks

Toolroom machining

Tooling support that reduces downtime and improves part consistency.

Die details and components
Repair support
Improvement modifications

Laser Cutting & Fabrication

Fast turn and flexibility.

Laser cutting

Prototype, fixtures, and short-run parts with clean profiles.

DXF-based workflows
Great for iteration
Consistent profiles

Secondary operations

Support steps that prepare parts for welding or assembly.

Deburr and edge conditioning (as required)
Fit-up prep
Packaging for protection

Fixture build

Fixtures that lock in repeatability for welding and assembly.

Datum-based design
Repeatable location and clamping
Inspection-friendly access

Welding & Assembly

Fixture-built consistency.

Robotic welding

Repeat assemblies with stable fixtures and controlled parameters.

Repeat production focus
Fixture-based alignment
Go/no-go checks as needed

Manual welding

Flexible support for unique jobs and lower-volume needs.

Controlled fit-up
Distortion awareness
Inspection built into flow

Assembly processes

From kitting to finished sub-assemblies, built to your receiving needs.

Fastening and sub-assembly
Kitting and labeling
Pack-out verification

Need a capability check?

Send your drawing/specs and we’ll confirm the best path to manufacture it.

Request a Quote View Capabilities